Attic Spray Foam Insulation Clemmons, NC 27012 | Winston-Salem Spray Foam Insulation

Spray Foam Insulation in Clemmons, NC (27012) · Local Professionals

Winston-Salem Spray Foam Insulation · Fast response in Clemmons and the Winston-Salem area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Clemmons' 1980s and 1990s two-story homes were built with vaulted ceilings, finished rooms over garages, and attics that sit in the brutal heat of a North Carolina summer, pushing 130 to 150 degrees while your air handler struggles below. Spray foam insulation and air sealing stops that heat before it enters, and it seals the rim joists and band joists that sit on the brick piers holding your home above the red clay.

Winston-Salem Spray Foam Insulation has been serving Clemmons (27012) and the surrounding Winston-Salem area since 2012. We know the two-story Clemmons floor plan, the vented attics that bake through humid summers, and the crawl spaces that sweat through the season. When a FROG room never cools, or your cooling bill has climbed out of reach, we show up with a free on-site estimate, tell you what will actually work, and spray it right.

Spray Foam Insulation in Clemmons (27012)

Clemmons homes sit on raised brick piers over vented crawl spaces, and most have attics with ductwork running through them. Your air handler pushes conditioned air through that attic in summer, losing efficiency to the heat, and in winter the temperature swings and humidity can leave insulation damp or condensation visible on rim joists and band joists. The finished room over your garage or at the far end of a duct run often runs five to ten degrees warmer in summer because it sits directly under an uninsulated roof deck.

Closed-cell spray foam seals the rim joists, the band joists, and the attic air leaks that open-cell foam or blown-in insulation cannot reach. Open-cell foam is less expensive and works well in sealed attics where moisture is controlled. Wall cavities in newer Clemmons construction are often hollow, and injection foam fills them without opening the wall. We remove old, damp or contaminated insulation first, let the wood dry, and then spray. Our team is fully insured, and we've been doing this work in Clemmons and Winston-Salem since 2012.

Our services in Clemmons

Attic Spray Foam Insulation in Clemmons · Open-cell foam on the roof deck turns a 150°F Winston-Salem attic into…
Closed Cell Spray Foam Insulation in Clemmons · Two-pound closed-cell foam delivers R-6.5 per inch with its own vapor retarder…
Open Cell Spray Foam Insulation in Clemmons · Half-pound open-cell foam air-seals attics and walls at a friendlier price per…
Wall & Injection Foam Insulation in Clemmons · Injection foam fills closed walls through small ports, no demolition.
Crawl Space Spray Foam Insulation in Clemmons · Closed-cell foam on crawl space walls and rims holds back muggy Piedmont air…
Rim Joist & Band Joist Spray Foam in Clemmons · Rim joists over daylight basements and crawl spaces leak conditioned air at…
Garage Spray Foam Insulation in Clemmons · Garage ceilings under bonus rooms are foam-sealed against radiant afternoon…
Metal Building & Barndominium Spray Foam in Clemmons · Closed-cell foam is the insulation that stops a Carolina metal building from…
Commercial & New Construction Spray Foam in Clemmons · Warehouses; offices; churches; soundstages and production builders served on…
Insulation Removal in Clemmons · Old blown-in and batts vacuumed out before any new foam goes in, never buried.
Insulation Replacement & Re-Insulation in Clemmons · The full reset: old material removed; gaps air-sealed…
Air Sealing in Clemmons · Top plates; can lights; chases; knee walls and attic hatches leak more cooled…

How a Job Works in Clemmons

You call us at (336) 608-5235 or request an estimate online. We schedule a free on-site visit to your Clemmons home, measure the attic, crawl space or walls, and talk through what you're seeing: a room that won't cool, a high bill, condensation, or insulation that has to come out. We walk the space with you, explain what will fix it, and give you a written estimate with R-value and thickness specs so you know exactly what you're paying for.

On the day of the work, our crew arrives with the spray rig and sets up mechanical ventilation. If old insulation has to come out first, we remove it and haul it away. We spray the foam in controlled passes, holding the manufacturer ratio and drum temperature, and keep the space ventilated while it cures. Attic work usually takes a day. We then clean up, pack out our materials, and walk through the space with you.

The foam cures in twenty-four to forty-eight hours. We ask you to stay out of the attic or sealed space during that window. After cure, the space is ready to use and the smell is gone. You'll feel the difference in your cooling and heating from the first month.

Attic spray foam in Clemmons typically runs from $1.50 per square foot for open-cell to $1.20 per board foot for closed-cell, depending on the R-value you need and the thickness we have to spray. A 1,500-square-foot attic with open-cell foam to R-38 usually costs between $2,250 and $3,000. Crawl space sealing starts around $2,500. Wall injection foam runs from $2 per square foot. Rim joist and band joist sealing starts at $650. If old insulation has to come out first, add $950 to $1,200 depending on the volume. The biggest variables are how much area we're covering, whether anything has to be removed, and whether you choose open-cell or closed-cell foam. We give you a free estimate at (336) 608-5235, measure on site, and quote you a firm price before we start.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Clemmons and nearby areas.

My FROG room never cools down, even when the AC is running hard. What will spray foam do?

A finished room over the garage sits directly under an uninsulated roof deck. Summer heat radiates through the sheathing and into the room, and the HVAC ductwork that feeds it often runs through an unconditioned attic, losing cool air before it reaches the room. Spray foam on the roof deck (or on the attic floor if the room is vaulted) stops the heat at the source. We seal the rim joists where the room meets the garage, and we air-seal the ductwork in the attic. That room will cool down to within a few degrees of the rest of your home. Call us at (336) 608-5235 for a free estimate.

I see moisture or condensation in my attic in summer, and the insulation looks damp. What do I do?

Damp insulation loses R-value and can lead to wood rot in the attic framing. Before we spray any foam, we have to know where that moisture is coming from. If your attic is vented and the insulation is damp from humid air, we may recommend a dehumidifier or improved ventilation before foam. If the moisture is from a roof leak or from humid air trapped in a sealed attic, we fix the moisture first or we walk away. We do not spray over wet substrate. Call (336) 608-5235 and describe what you're seeing. We'll tell you what has to happen first.

How much does it cost to spray foam an attic in Clemmons?

Open-cell foam starts at $0.55 per board foot, or roughly $1.50 per square foot for a typical attic. Closed-cell foam is denser and costs more, starting at $1.20 per board foot. A 1,500-square-foot attic to R-38 with open-cell usually costs $2,250 to $3,000. If you have old insulation that has to come out first, add $950 to $1,200. The exact price depends on the area, the R-value you need, and whether anything has to be removed. We measure on site and give you a written estimate with thickness and R-value specs. Call (336) 608-5235 for a free estimate.

What do the energy code and building code in Clemmons say about spray foam insulation?

North Carolina's energy and building code sets the R-value your attic needs (usually R-38 to R-49 depending on the year your home was built) and requires an ignition barrier and a thermal barrier on the foam. The thermal barrier is the detail most contractors get wrong: it's a one-inch air gap or a code-listed material that slows the spread of flame for fifteen minutes. Permits and code inspection vary by city, so always check with the City of Clemmons or your local building department to confirm what applies at your address. We help you navigate what the code requires and we build it in from the start.

Can we live in the house while you're spraying foam?

Yes, but with limits. We set up mechanical ventilation in the attic or crawl space during the spray and cure. The smell is strong while we're spraying and while the foam cures (twenty-four to forty-eight hours). We ask you to stay out of the attic or sealed space during that window. Other parts of your home can be occupied normally. If you have young children, elderly residents or pets sensitive to fumes, tell us when you call. We'll talk through the best timing for your household.

Are you insured for spray foam work at my Clemmons home?

Yes. We are fully insured with general liability and workers' compensation. Our crew is covered for the work we do and for any damage that might happen on your property. When you get your estimate, we'll show you our insurance information. Never hire a spray foam contractor without verifying their insurance coverage, whether it's us or anyone else.

When is the best time to spray foam an attic in Clemmons?

Spring and fall are ideal because the weather is mild and humidity is lower. Summer heat makes the cure slower and the smell lingers longer. Winter works fine too, but ice storms can delay scheduling. The real driver is comfort: if your cooling bill is out of control in summer or a room won't cool, that's the time to act. We work year-round. Call (336) 608-5235 and we'll find a time that works for your schedule.